關於台溢 品質政策 產品介紹 回函表單 聯絡資訊
About us Quality & Policy Products Online lnquiry Contacts
研磨攪拌設備系列
Equipment
精密陶瓷系列
Porous Ceramics
代理設備
Distribution
本機器榮獲中華民國發明專利第205696、241128、254988號專利證書
產品特色:
適用於各式熱敏性物質、纖維性物質、氧化金屬粉末、中西藥品、化妝品、農藥,需要研磨至( d50)0.7um~15um  (d95)1.7um~75um。最適合使用次微米級超微粉碎機來達到您所需要的平均粒徑。
Latest designed air flow ultra fine power stainless steel crusher of us is designed subject the weak heat substance, fibrous substance, metal power, Chinese and western medicine, cosmetic, agrochemicals, foods stuff, general organic and non-organic substance, which require a particle diameter of( d50)0.7um~15um, (d95)1.7um~75um, most suitable ultra fine power crusher.
應用範圍:
適用於中西藥業、食品業、農、漁飼料業。
For industries such as herbal and pharmaceutical, food, agricultural, fishery, feed, chemical materials, power paint, and laboratories.
粉碎原理 / Principle of crushing:
原料進入粉碎槽內與高速旋轉的粉刀與固定刀,所產生超高速空氣旋回氣流發生衝擊、剪斷、壓縮、磨碎、高周波震等作用,原料成微粒子後,經負壓風車機引進入到旋風集粉器和脈衝噴射式袋濾器。
When the raw materials to be put in crusher chamber, it works with a high speed crush blades and liner, it causes a air blast, cutting, compressing, grinding, high wave shocking under a super high speed air flow and whirl wing, the materials become a micro particle. Having separated by ventilator, the micro particle was pulling into cyclone collector and Pulse-jet type bag filter through negative pressure blower.
機器特點 / Features of the machine:
1. 本機器的主要材質均為SUS304製成,符合衛生標準,粉碎刀為鎢鋼刀(TCT)製成,耐磨損使用壽命長。
2. 粉碎槽內零件均可快速拆除清洗避免原料相互汙染問題,旋風集粉器與脈衝噴射式慮袋器之間管路接頭均使用衛生
    級的夾具,拆解不需要工具,清洗容易。
3. 本機器可加裝冷凍乾燥機,始粉碎槽工作溫度降低,確保原料品質不變化。
4. 本雞裝設有溫度控制器,如粉碎槽溫度超過設定值時,會使自動送料機停止送料,待溫度下降時,再重新啟動自動
    送料機。
1. The main material of model:RT-UF75SAFP is sus304, it meets sanity standard, crush blade is made of
    Tungsten Carbide Tip, wear-proof and long lasting.
2. All the spare parts in crush chamber can be removed quickly and easily for cleaning it can prevent any
    cross-pollution. The adaptor of pipeline that between cyclone collector and pulse-jet type bag filter are with
    sanitary clamps, easy clean and disassemble without any tools.
3. The extra dehydro-freezer can equipped on this machine, it can lower down the temperature of crusher chamber,
    and assure the quality of material unchanged.
4. This machine is equipped with thermometer controller, if the temperature of crush chamber is out of the
    numerical control, it can be stopped feeding automatically, when the temperature is down, it can re-star feeding
    automatically.
產品規格表 ( ※本機需要搭配空氣壓縮機,客戶需要自備,建議使用5HP空氣壓縮機 )
粉碎軸馬力 / Rotor Power 7.5HP
送料軸馬力 / Feeder 0.5HP
風車馬力 / Bellower Power 3HP
電壓 / Voltage 220V/60HZ/3相(可依客戶需求製作)
風量 / Inlet Airflow 5M3/分鐘
壓縮空氣消耗量 0.3-0.8 m3/min
粉碎軸轉速 / Shaft Rpm 3450-6500RPM
送料軸轉速 / Feeder Rpm 1-30rpm
機器尺寸 / Dimension 4000*1500*2400mm
( 包含粉碎主機、自動送料機、旋風集粉器與脈衝噴射式袋濾器 )
機器重量 / Weight 400KG
產量 / Production 1-8KG/HR ( 實際產量、細度需視原料種類、比重而定 )